Vice for BenchMate GRS

€373.99*

Currently not available. Delivery time: more than 6 weeks

STK

Product number: 4510075

Product information "Vice for BenchMate GRS"

The multifunction vice uses the
versatile BenchMate System "lift on / lift off".
Unlike other vices,
the multifunction vice can be adjusted
to any angle by tilting and rotating
along two axes. It is made of steel with
high precision and is very robust. The holding jaws
are 58.4 mm wide, 40.6 mm high and
open to a width of 45.7 mm. Fits
any BenchMate mounting plate and optional
mounting adaptors (not
included). Using the clamping and holding tool set
520 for the multifunction vice,
(#003-520MPV), many common problems
when holding workpieces can be
solved easily, must be ordered
separately).

Article name:	Vice, rotatable
Brand:	GRS
Catalogue item No.:	004-628
Clamping range:	45
Dimensions height mm:	50
Dimensions width mm:	90
External dimension length:	152
Gross weight grams:	1076.00
Internal dimensions width mm:	57

Manufacturer Informations

Name: Rudolf Flume Technik GmbH
Street: Hachestr. 66
City: 45127 Essen
Country: DE
Email: info@flume.de
Phone: 0049-201-18990

Accessoires (optional)

BenchMate pitch cup, round, dia. 45, 8mm with pitch

The pitch cup is filled with a special setter pitch that softens when heated. Small, fragile, or irregularly shaped pieces can be easily held in place for engraving, stone setting, and other work. Fits all vices, engraver's cushions, or BenchMate systems. Diameter: 50.8 mm.

€72.99*

GRS ring holder for engraving

This unique holder for affixing rings allows for easy processing of their inside. They can be held in your hand or in any vice or engraver's cushion. Made of solid steel for long life.

€146.99*

GRS ring holder with 7 inserts, horizontal for vice

This holder securely and firmly holds the rings on their inside. Ideal for setting stones or for engraving work. Fits all GRS engraver's cushions and most vices. Includes: Holder body, 7 clamping sleeves dia. 22 - 21 - 20 - 18 - 16 - 15 - 14 mm Expansion mandrel Bolts and keys

€142.99*

GRS ring holder with 7 inserts, vertical for vice

€134.99*

GRS holding accessories, 30 pieces, for engraver's cushion MagnaBlock

€288.99*

GRS Index ring holder set

The GRS ID ring holder redefines holding of rings. By tightening the clamping axle, the clamping sleeve is pressed into the clamping cones on both sides. This creates uniform pressure and spreads the clamping sleeve evenly. This holds the ring securely on the inside. When using the standard cone, the tension can be adjusted so that the ring can rotate easily during engraving. In contrast, the clamping cone locks the clamping sleeve so that the ring is held in a fixed position. This allows for secure stone setting. The ring holder is a good, affordable choice if you are looking for a simple, functional, and high-quality solution. Includes: (1) ID ring holder, (2) sets of 10 pieces each of clamping sleeves, (2) standard cones, (2) cones with special toothing, (1) clamping axle, (1) retaining nut, (1) hex nut, and (1) GRS Allen wrench. Clamping sleeve diameter: 13.5 mm, 14.5 mm, 15.5 mm, 16.5 mm, 17.5 mm, 18.5 mm, 19.5 mm, 20.5 mm, 21.5 mm, 22.5 mm Pictured in the assembled state with 18.5 mm clamping sleeve and standard cone.

€161.99*

BenchMate ring mandrel, aluminium

Interchangeable clamping jaws hold rings securely for processing without deforming. It is similar to the BenchMate holder, but for the ease of manual work, it is lighter and made of sturdy aluminium.

€134.99*

BenchMate pitch cup, square 127 x 89 x 12.7mm, with pitch

The pitch cup is filled with a special setter pitch that softens when heated. Small, fragile, or irregularly shaped pieces can be easily held in place for engraving, stone setting, and other work. Fits all vices or engraver's cushions. Dimensions (L × W × D): 127 × 89 × 12.7 mm

€150.99*

BenchMate pitch cup, round, dia. 50, 8mm without pitch

Fits all vices, engraver's cushions, or BenchMate systems. Diameter: 50.8 mm. Pitch not included.

€38.99*

Plastic jaws for BenchMate GRS

Package with ten plastic holding jaws.

€22.99*

Ring stick for BenchMate GRS

By exchanging the plastic sleeves, rings of different diameters can be held from the inside. The ring is clamped in quickly and easily with a cone and an Allen wrench. Includes seven interchangeable plastic inserts dia. 14 - 15.5 - 17 - 18.5 - 19.5 - 20.5 - 22 mm.

€223.99*

Shellac plate for BenchMate GRS

For clamping into the BenchMate setter holder. Using shellac or wax, small irregular parts can be mounted on the plate. This allows performing work even on small workpieces that would be difficult to work with otherwise.

€34.99*