Quartz pendulum movements
These pendulum movements are universal and easy to install. Their independent pendulum drives have no influence on their accuracy - they can be operated without pendulum.
Their common features are:
- Quartz crystal control for high acccuracy.
- Easy installation with a dial center mounting screw.
- Dial center hole Ø of 10.2 mm
- Complete mounting hardware included: Center mounting screw, hand nut, 2 rubber washers. Exceptions are listed in the movement descriptions.
- Running time with a long-life battery: Approx. 1 year.
- Maximum load on movement hanger approx. 1.2 kgs. For heavier dials, please use Order-No. 242399.
Haller rotating pendulum movement for plug hands
€47.99*
Function:
for clocks with plug hands
Resistant, patented quartz rotating pendulum movement without a pendulum spring
Secure, fixed bearing, for pendulums with rigid axles (no pendulum springs)
• No vulnerable spiral or pendulum spring
• Secure fixed storage, no use of adjusting washers
• Extremely quiet, slow running
• Does not require exact alignment of the clock in the "water" (the previous exactly horizontal base/alignment, which one had to pay attention to in the past with mechanical annual clocks, is no longer necessary - the innovative, quartz-controlled annual clocks also run on a slightly "sloping" surface, which just isn't is exactly "in the water")
• Robust - over-tightening is not possible
• Running time up to two years with an alkaline mignon cell, type "AA"
Rotating pendulum movement with minute tube/hour tube for hands (usually plastic) to attach
(Mainly used for watches in the entry-level class or with plastic hands)
Pendulum drive PB up to 40cm pendulum lengths
€16.99*
Application:
pendulum lengths up to 40cm
Transistor controlled. Without pendulum.
Is simply mounted between clock mouvement and watch case. The dial thickness to be considered increases by about 2 mm.
Suitable for use with movements FK, GK, WB, WD, WL, WK, WX and WZ.
Recess for movement: 56 x 56 mm
Battery: 1.5V mignon cell
Running time / Battery: Approx. 1 year
Pendulum lengths: up to 40cm. Please order matching pendulum separately!
Depth: 31 mm
For the exact installation dimensions, please refer to the enclosed PDF document.
Quartz pendulum clock movement Dugena 817, pointer length 11.00mm
€21.99*
Hand wavelength mm:
11.00
Equipment: retractable hanger and installation accessories. Please order pair of hands separately!
Matching pointers: up to max.120mm
Second hand up to 80mm
Installation Ø: 100mm
Dial thickness approx. Up to approx. 4.0 mm
Pointer shaft length with second approx. 13.5mm
Pointer wavelength without second approx. 11mm
Successor to the Junghans factory 4123-104716
Powerful pendulum clockwork, ideal for installation in wall clocks of all kinds
Quartz pendulum clock movement Hermle 2200, HSL 16mm
€27.99*
Hand wavelength mm:
16
Strong pendulum movement, ideal for installation in wall clocks of all kinds.
Please order matching pendulum separately.
Equipment: integrated hanger, complete installation accessories
Matching hands up to max. 120mm long, second hand up to 80mm long
Installation Ø: 100mm
Quartz pendulum clock movement Hermle 2200, HSL 20mm with front panel for weight dummies
€67.99*
The independent pendulum drive has no influence on the high accuracy of this movement.
Equipment:
Complete installation accessories, with front panel. Without pendulums and weight dummies.
Built-in Ø: 155 mm, center hole Ø: 10.2 mm,
Battery: 1 x 1.5 V mignon cell,
suitable hands: up to max. 120 mm long.
Please order matching pendulum separately.
Quartz pendulum clock movement Hermle 2214, HSL 15mm, Westminster or Bim Bam
€95.99*
Hand wavelength mm:
15.00
Euphonius chime, 2 selectable melodies:
- full 4/4 westminster stroke (hours are counted)
- Bim-Bam stroke at half and full hour (hours are counted)
- Sleep mode possible with reduced volume
- Volume adjustable: 100% / 50% / 0%
Installation Ø: 120mm
Please order matching hands separately.
Equipment: Ø 66 mm speaker with clip-on holder, integrated hanger,
complete installation accessories
Quartz pendulum movement CS UTS 812, Bim-Bam or Westminster HSL 22mm
€88.99*
Hand wavelength mm:
20.10
With electronically generated chime
Dial center hole Ø 10.2 mm.
Euphonious chime, 2 selectable melodies:
Full 4/4 westminster chime (hours are counted).
Bim-Bam chime at half and full hour (hours are counted).
Installation Ø 120 mm
Matching hands up to max. 120 mm
Second hand up to 80 mm
Equipment
Ø 66 mm speaker with clip-on holder, integrated hanger, complete installation accessories.
Caution
Now with side mountable speaker mount!
Without pendulum and hands.
Please order hands pair separately!
Quarz-Pendeluhrwerk UTS 802, ZWL 26,2mm, Euroschaft
€27.99*
Hand wavelength mm:
26.20
Kräftiges Pendelwerk ohne Schlag, ideal für den Einbau in Wanduhren aller Art.
Ausstattung: Integrierter Aufhänger, komplettes Einbauzubehör, Ohne Pendel und Zeiger.
Lieferung INKLUSIVE Sekundenzeiger, Distanzscheiben, Zentralschraube, Zeigermuttern, Sekundenzeiger, Bedienungsanleitung.
Quartz pendulum movement EP UTS, HSL 52mm
€39.99*
The independent pendulum drive has no influence on the high accuracy of this movement.
With suspension bar for dummy weight. WITHOUT weight dummies and pendulum.
Installation Ø 120 mm
Matching hands up to max. 120 mm
Suitable weight dummies up to Ø 40 mm