Glass glue

For firm gluing of watch glasses, gemstones, and others. The 2-component watch glass glue is ideal for bonds that must meet the highest standards. The adhesive is resistant to chemicals, such as dilute acids and alkalis, petrol, many solvents, and moisture. Benefits of the 2C glue: It dries clear and distinguishes itself - in comparison with fast-curing 2-component epoxy resins - by proper processing with very high resistance to yellowing (with minimal intrinsic colour). Suitable for bonding glass, ceramics, wood, stone, concrete, marble, metals, thermosets, many hard plastics, glass fibre reinforced plastics, and Styrofoam®. Not suitable for soft plastics, PE, PP, rubber, nylon, and for bonds that are subject to bending stress. Because of its low viscosity, the 2-component watch glass glue is only suitable for bonding in which the adhesive composition cannot flow away during curing. Contents: 100g resin C and 40 g hardener V20L

Fantastic, transparent glue for making jewelry, but also many other uses. With this transparent adhesive, mosaic stones made of glass, ceramics, stone and plastic are glued quickly and safely to all hard, non-absorbent surfaces, e.g. glass, lacquered wooden surfaces, plastic, metal, ceramics and porcelain. Due to the adhesive power of the glue, vertical glass parts can also be covered quickly and safely with mosaic stones and glued in such a way that they do not slip off after the adhesive liquid has been applied to the mosaic stones. This adhesive technique is very economical as it only requires a small amount of glue and at the same time ensures great adhesion to the glass surface. • High viscosity • Adhesive substance: fast-acting adhesive emulsion, produced on the basis of acrylic acid ester in conjunction with calcium carbonate, which causes a quick adhesive bond and effect. • Application tip: Transparent drying universal adhesive, which is ideally suited for the secure bonding of glass, ceramic, plastic and natural stones as well as for wood and metal • Material consumption approx. 125 to 140 g / m² • Hardening: Fast adhesion after 20 to 40 minutes, final hardening after 8 to 12 hours • Tool cleaning: water • CLP classification: Free of harmful substances - not subject to the GHS regulation Made in Germany

Classic adhesive for plexiglass.

Adhesive for plexiglass and mineral glass. Tube with fine cannula and protective cap.

Special adhesive for mineral glass in a tube syringe. Cures under UV lamp.

For extremely fine dosing.

Suitable for the bonding of glass, simile and synthetic stones with metal, porcelain, ceramics and many hard plastics. Greased semi-precious stones must be thoroughly degreased and sanded before bonding. Not suitable for bonding, of nylon; PTFE or soft plastic like soft PVC, PE, PP. Mixing ratio 1: 1, processing time: 5 min. Conditionally stressable after approx. 20 minutes, hardened after 2-3 hours. Fully loadable after 12 hours. Overview: - adhesive for the highest demands - Resistant to chemicals such as diluted acids and alkalis, gasolines, many solvents and moisture - dries crystal clear - very high resistance to yellowing (with minimal inherent color) when correctly processed (unlike other 2K epoxy resins) - Due to its low viscosity, it is only suitable for bonds in which the adhesive mixture can not flow away during curing. (By adding an additive, a thixotropy can be achieved, so that a flow of the adhesive could be prevented)