Clamping, gripping, drilling, screwing
If you want to work precisely and cleanly, you have to make sure that your workpiece is absolutely fixed. Here you will find a selection of practical and useful tools for clamping, drilling and screwing.
10-piece mini drill set, diamond coating
€39.99*
10 HSS mini spiral drill bits with high-quality diamond coating - high concentricity through 2.35-mm shaft.
As a result, these drill bits are particularly suitable for drilling precise holes in hard materials such as thin glass or stone, and for very clean holes in epoxy printed circuit boards.
Scope of delivery: 2x 0.8/1.0/1.2/1.4/1.5 mm in plastic case
30-piece mini drill set, 2.35-mm shaft
€39.99*
Carbide drill set, 30 pcs., Shaft 2,35mm
Each 2 pcs of 0,5mm - 2,3mm
Length: 45 mm
The shaft diameter of 2.35 mm guarantees very high concentricity and therefore optimal power transfer from chuck to drill bit.
Suitable for use with metal, non-ferrous metals and plastics.
Included with delivery: 2 pieces each: 0.5/0.6/0.7/0.8/0.9/1.0/1.1/1.2/1.3/1.4/1.5/1.6/1.8/2.0/2.3 mm. Comes in a plastic case.
5Pcs Star Screwdriver Set W/Temper Proof Hole
€13.99*
Tamper-proof holes are provided for screws such as torx screws with a projection in the screw head. These screws are used in cases where tampering could be a problem. Select the size for working with mobile telephones, communications equipment, radios and precision equipment.
Contents
05H, T06H, T07H, T08H, T09H
Adjustable Pin Vise Hand Drill Keyless Chuck 0,5-8mm
€26.99*
For holding drills, reamers, countersinks, files, workpieces etc. Quick-action chuck for Ø 0,5 bis 8mm
This miniature hand drill is an ideal tool for holding small jobs, holds drill bits and reamers etc.
- Fits securely and comfortably in the For palm of your hand.
- Use it as simple as a screwdriver.
The revolving head makes this tool handy to use as a hand drill with twist drills or with taps for thread cutting. A multi use tool, with the range of the collets can hold reamers as well as screwdriver heads any round shank bits.
It can be used for delicate work with Jewelry work, when constructing models, working on instruments and repair of watch and clock components. A well made tool and very handy tool to have.
Specification:
Material: Carbon Steel and Plastic
Netweight: 0.14kg
Total length: app.15.5cm/6.10in
Hand grip length: app.11cm/4.33in
Chuck range: 0.5-8mm
Analog multimeter
€44.99*
Multimeter / electrotechnical measuring device that can be used for several measured variables and in several measuring ranges - of course also usable as a voltage meter and current meter. Robust housing with protective border, can be set up. With 2 battery compartments for 9V and 1.5V batteries (AAA). With surge protection.
Case dimensions: 160x105x40mm
Enables reliable measurements in a wide range of applications (DC/AC voltage, +/- DCV, DC current, resistance and diodes, LED test, batteries, transistors, conductivity, capacitance)
Angle hose clamp
€19.99*
Ideal for light clamping work
For precise 90 ° clamping of workpieces of different thicknesses. For miters and T connections.
Material
Die-cast zinc with steel spindles.
Dimensions
Max. Clamping range 75 mm.
Content
1 piece.
Anvil for fastening to workbench
€29.99*
Can simply be clamped to the workbench. For hammering, sawing, filing, etc.
A convenient combination for the workplace.
Weight: approx. 1.4kg
Assortment Of Screws
€69.99*
Great assortment of screws for all occasions with screws, nuts, washers and caps.
• Many different sizes
• In a clear sorting box
• Ideal for all watch and optical work
• Also perfect for electronic devices and precision engineering
• Screws made from high quality stainless steel
Bench vice Fortissimo Fix steel forged, 125mm jaw width
€181.99*
According to the manufacturer, the Fortissimo Fix parallel vice is "100% unbreakable" - indestructible.
Forged from CF45 steel. CF45 steel is a special tempering steel for flame and induction hardening or surface hardening.
- The jaws and anvil are induction hardened.
- Adjustable guide guarantees precise clamping.
- Guide rails protected from dirt by wipers.
- With welded pipe clamping jaws.
- Guarantees precise and parallel clamping of workpieces.
- Tension: 4,000 to 4,500kg
Technical specifications:
- jaw width: 125mm
- Maximum span: 160mm
- Overall length: 388mm
- Anvil size: 50 x 70mm
- Base diameter: Ø 150mm
- Hole diameter: Ø 113mm
- Hole spacing: Ø 13.5mm
- Spindle wrench: Ø 15mm
- Jaw depth: 72.5mm
- Vice height: 139.6mm
- Weight: approx.9.3kg
- Measure for pipes / spans from 3/8 - 1 1/2 inches
- Lifetime manufacturer's guarantee (when used according to the instructions for use)
- TÜV-Süd checked
- GS mark for tested safety
- Matching turntable (reference 331115) optionally available
Bench vice Fortissimo Fix steel forged, 150mm jaw width
€215.99*
According to the manufacturer, the Fortissimo Fix parallel vice is "100% unbreakable" - indestructible.
Forged from CF45 steel. CF45 steel is a special tempering steel for flame and induction hardening or surface hardening.
- The jaws and anvil are induction hardened.
- Adjustable guide guarantees precise clamping.
- Guide rails protected from dirt by wipers.
- With welded pipe clamping jaws.
- Guarantees precise and parallel clamping of workpieces.
- Tension: 4,000 to 4,500kg
Technical specifications:
- Jaw width: 150mm
- Maximum span: 189.935
- Overall length: 480mm
- Anvil size: 68 x 84mm
- Base diameter: Ø 179.6mm
- Hole diameter: Ø 137mm
- Hole spacing: Ø 16.5mm
- Spindle wrench: Ø 15mm
- Jaw depth: 96mm
- Vice height: 188mm
- Weight: approx.18.5kg
- Measure for pipes / spans from 3/8 - 1 1/2 inches
- Lifetime manufacturer's guarantee (when used according to the instructions for use)
- TÜV-Süd checked
- GS mark for tested safety
- Matching turntable (reference 331116) optionally available
BERGEON Assortment of 5 screwdrivers
€76.99*
Assortment of 5 screwdrivers
Chromium-plated.
First quality.
Contents: Ø 0.50 - 0.60 - 0.80 - 1.00 - 1.20 mm.
In plastic pouch.
Bergeon minute wheel pin pliers
€245.99*
Made of polished cast steel.
Box joint.
Good quality. For change gear pins. Length: 130 mm.
BESSEY Clippix pointed clamp
€14.99*
Precise clamping!
Pointed spring clamp.
Long, pointed jaws with material-friendly inserts for fine clamping in tight spaces. Max. Span approx. 5 cm, large projection of approx. 5 cm, total length 11 cm. 2 pieces / pack.
Bitbox with 80 bits
€31.99*
For all types of screw heads!
Handy aluminum case with 80 bits for a wide variety of safety and standard screw heads.
Including 17 extra-long bits for countersunk screws.
Handy ratchet handle with right / left switching.
Case dimensions 20.5 x 6 x 15.5 cm.
BRÜDER MANNESMANN cordless drill / driver with 55-piece tool assortment
€74.99*
Cordless drill with 55 pcs. Tool range: ideal for cordless drilling and screwing in wood and metal.
Thanks to the extensive range of tools with screws, pliers, bits and much more, all relevant tools are quickly at hand when you are working! Thanks to the 10mm quick-release drill chuck, drills and bits can be changed quickly and without tools.
Each tool has its own dedicated space for order and clarity.
• Included in our scope of delivery:
1) Cordless drill 8 V - 1.3 Ah Li-ion battery - Ø 10 mm quick-release drill chuck
2) range of tools:
- 1 x combination pliers 160 mm
- 2 x screwdrivers (slotted 5 x 75 mm and PH1 x 75 mm)
- 1 x tape measure 2m
- 1 x assortment of small parts
- 1 x screw handle for bits
- 20 x bits 25 mm
- 10 x bits 50 mm
- 1 x magnetic bit holder
- 9 x socket wrench inserts 6.3 mm (1/4 “9) 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 • 13mm
- 1 x adapter for socket wrench inserts
- 4 x wood drill bits 3 • 4 • 5 • 6 mm
- 4 x twist drills 1.5 • 2 • 2.5 • 3 mm
BRÜDER MANNESMANN cordless drill / driver with a second battery
€100.99*
• 2 lithium ion batteries 20V, 1.5 Ah
• Infinitely variable speed electronically adjustable
• Infinitely adjustable speeds from 0 to 650 rpm
- 0- 400 min / 0-1,400
• 2 adjustable speed levels
• Ø 10 mm quick-release drill chuck
• Integrated work light
• Toggle lever (left / right rotation) available
• 18-fold torque settings + 1 “drilling” stage for precise drilling
• 1 double bit on the screwdriver
• Non-slip anti-slip handle
• One hour quick charger
From the "Pro" series - indispensable for demanding construction, drilling and renovation work.
Material: Plastic
Dimensions: length 26 x width 24 x height 8 cm
BRÜDER MANNESMANN electronic drill with tool assortment
€102.99*
Electronic drill (750 watts) with 36 pcs. tool set
• Electronic speed control
• Reversible forward/reverse rotation
• 13mm drill chuck
• Adjustable handle and depth gauge
Included with us:
Contents:
• 1 drill (750 watts)
• 6 twist drills 3 • 4 • 5 • 6 • 8 • 10mm
• 3 masonry bits 6 • 8 • 10mm
• 6 wood drills 3 • 4 • 5 • 6 • 8 • 10mm
• 2 glass drills 6•8mm
• 9 bits
• 1 adapter for 6.3 mm (1/4") sockets
• 1 saw arch 150 mm
• 1 combination pliers 160 mm
• 1 spirit level 150 mm
• 1 utility knife
• 1 screw handle for bits
• 1 tape measure 3m
• 1 adjustable wrench 200 mm
• 1 machinist's hammer 300g
• 1 assortment of small parts (60 pieces)
Total weight approx. 5.1kg
BRÜDER MANNESMANN precision cordless screwdriver, 13 pieces
€39.99*
It has never been easier to tighten or loosen screws safely, precisely and quickly, even in precision engineering.
The cordless screwdriver can be used flexibly, is quickly at hand and, despite its low weight and compactness, powerful.
Suitable for a wide range of applications - whether optics, watchmaking, precision mechanics and much more!
Simply charge via USB!
• Stick cordless screwdriver, reversible clockwise and counterclockwise rotation
• Bit depot with 10 bits as a stand including slot 1 / 1.5 / 3 mm - T-profile: T5 / T6 / T8 - Philips: PH000 / PH00 / PH1 - hexagon socket 2 mm
• Idle speed 120 rpm
• Torque 4 Nm
• Lithium-ion battery, 3.6 V, 320 mAh
• Delivery including charging cable and bits
• Including charge indicator and LED work light
• Non-slip, non-slip anti-slip pad
• Magnetic bit holder